Written scope
Door count, finish and repair list
Cabinet Painting and Refinishing San Angelo TX
Cabinet Painting and Refinishing San Angelo TX is the fastest way to modernize a kitchen without ripping out boxes. We degrease, sand, prime and spray your doors and frames on site, so your layout stays and your budget holds. If your oak or MDF fronts are dated, greasy or peeling, we refinish them in 3-5 days.
- Oak fronts
- Peeling laminate
- Sticking doors
- Written scope firstItemized quote before any cutting
- Template every runReal dimensions, not catalog guesses
- Shop-sprayed finishDoors finished before they arrive
- Doors tuned on siteHinges and glides adjusted before handoff
What Our Cabinet Refinishing Service Includes
Every refinish job includes the prep, the repair and the spray. We do not charge extra for the small fixes that make the finish last. Here is what is covered when we refinish your kitchen cabinets in San Angelo TX.
- Door and Drawer RemovalWe pull every door and drawer front, label it, and bag the hardware. Frames get masked so counters, appliances and floors stay clean. You do not have to empty your cabinets unless you want to.
- Degrease and SandKitchen grease is the number one reason paint fails. We clean with a degreaser, then sand with a random-orbit sander and hand-sand the profiles. This gives the primer a surface it can actually grip.
- Repair and RefitCracked joints get glued and clamped. Warped wood gets planed. Sticking doors get re-fit after spraying. Peeling laminate gets trimmed and sealed. We correct the problems that make cabinets feel old.
- Prime and Spray FinishWe spray a bonding primer, then two to three finish coats with sanding between each. Doors are sprayed flat for an even film. Frames get the same product and sheen so the kitchen matches.
- Reinstall and Touch-UpWe rehang every door, set the hinges, install your hardware and check each one for rub. Any handling dings get touched up. We clean the work area and walk the kitchen with you before we leave.
For San Angelo Homes
We refinish kitchen and bathroom cabinets in occupied homes, working room by room so you keep your routine. Doors come off, get sprayed, and go back on the same week.
- Dated oak kitchen fronts
- Peeling laminate near sink
- Sticking doors and drawers
- Two-tone island and uppers
For Local Properties
We refinish cabinet fronts in rental units, small offices and hospitality spaces around San Angelo. Work is scheduled around your hours so tenants and staff are not disrupted.
- RentalsRefresh unit kitchens between tenants
- OfficesRefinish built-ins and file cabinets
- Break roomsSpray cabinets in shared kitchens
- Small retailRefinish display and storage cabinets
Cabinet Painting and Refinishing San Angelo TX
Cabinet Painting and Refinishing San Angelo TX means we take your existing doors, drawer fronts and frames and bring them back to a factory-smooth finish. We pull every door, label it, degrease the years of kitchen grease, then sand, prime and spray. Doors go through a controlled spray process; frames get masked and sprayed in place. You keep the boxes you already paid for and get a finish that stands up to daily use.
Most San Angelo homes we walk into were built between the 1970s and 2000s, and the cabinets show it. Oak fronts with orange shellac, laminate that has started peeling near the sink, doors that stick every summer because the humidity swells the wood. Refinishing solves all three at once. If you have been searching cabinet refinishing near me San Angelo, this is the work we do every week in Tom Green County.
We fix the doors first, then spray a finish built for Texas heat.
Our Cabinet Refinishing Process
Five steps, one crew, no surprises. Here is exactly what happens from the first walkthrough to the day we hand your kitchen back.
Walkthrough & Quote
We come out, count doors and drawers, check for water damage, peeling laminate and warped wood, and measure the run. You get a written number the same visit. Most quotes take 30-45 minutes because we look at the boxes, not just the fronts.
Remove & Label
On day one we pull every door and drawer front, tag it with its location, and haul it to our spray area. Hinges, bumpers and pulls go into labeled bags. Your frames get masked with plastic and paper so overspray never touches counters or appliances.
Clean, Sand & Repair
We degrease with a TSP-style cleaner, then sand with a random-orbit sander to break the existing finish. Cracked joints get glued and clamped. Peeling laminate edges get trimmed and sealed. This is the step that decides whether the paint holds for ten years or two.
Prime & Spray
We spray a bonding primer, then two to three finish coats, sanding between each. Doors are sprayed flat so you get an even film with no brush marks. Frames get sprayed in place with the same product and the same sheen so the whole kitchen matches.
Reinstall & Adjust
Once cured, we rehang every door, set the hinges, install your hardware and check each one for rub. We touch up any dings from handling, clean the work area, and walk the kitchen with you before we load the truck.
Tools and Methods We Use
HVLP Spray Gun
Delivers an even, factory-style finish on doors and frames with minimal overspray. It is the reason our sprayed cabinets do not show brush or roller marks.
Random-Orbit Sander
Used with a range of grits to break the existing finish and flatten the surface without gouging the wood. Essential on oak and MDF fronts.
Router and Table Saw
For repairing or replacing damaged stiles, rails and shelf supports. We can match a profile on site instead of ordering a whole new door.
Clamps and Nail Gun
Used to glue and clamp cracked joints and re-secure loose face frames. A clamped joint cures stronger than a screwed one.
Moisture Meter and Measurement Tools
We check the moisture content of the boxes before priming. High moisture in San Angelo means the finish needs a different schedule.
CNC Machine and Panel Saw
For cutting replacement doors, drawer fronts and shelf panels to exact size when a piece is too far gone to refinish.
Bonding Primer System
We match the primer to the substrate: shellac-based for oak tannins, bonding primer for laminate and melamine, and a sanding primer for MDF. The wrong primer is why cheap refinish jobs peel within a year.
Controlled Spray and Cure
Doors are sprayed flat in a controlled area, then cured before handling. We sand between coats and let each one set. This is what gives the finish its depth and its resistance to kitchen heat and humidity.
When To Refinish Your Cabinets
You are selling the house and the kitchen looks dated in listing photos.
We refinish the fronts in a current color, fix the sticking doors and replace the hardware. The kitchen photographs like a remodel without a remodel price. A listing-ready kitchen in under a week, with a finish that holds up through showings and inspections.
You just bought a 1980s home in San Angelo and the oak cabinets are solid but ugly.
We degrease, sand and spray the existing boxes in the color you want. The boxes are sound, so there is no reason to replace them. A modern kitchen for a fraction of a replacement quote, with the same storage and layout you bought the house for.
Your laminate fronts are peeling near the sink and dishwasher.
We trim and seal the loose edges, prime for laminate, and spray a finish that resists moisture around the wet zones. The peel stops spreading, and the fronts look new instead of patched.
You want a two-tone kitchen with a navy island and white uppers.
We spray the island and the uppers in separate colors, matching the sheen so the two-tone reads as intentional design. A custom look without buying a single new cabinet box.
How Cabinet Refinishing Works in San Angelo
San Angelo sits in Tom Green County where summer heat pushes past 100 degrees and humidity swings hard between seasons. That cycle swells wood, opens joints and makes doors stick. It also means the finish you choose has to handle heat and moisture, not just look good on day one. We schedule spray work in the cooler morning hours when we can, and we let each coat cure fully before the next. Older homes near Downtown and Santa Rita often have solid oak boxes with shellac that needs a shellac-based primer to block tannin bleed. Newer builds in PaulAnn and North Angelo tend to have MDF or laminate fronts that need a bonding primer instead. If you have been searching cabinet refinishing San Angelo Texas, the prep is what separates a finish that lasts from one that peels. We also check for water damage around sinks and dishwashers, since that is the most common hidden problem we find in San Angelo kitchens.
- Downtown San AngeloOlder homes with solid oak cabinets and shellac finishes. These need tannin-blocking primer before the color coats go on.
- College Hills1990s builds with oak fronts and laminate counters. Sticking doors from humidity are the most common call we get here.
- Santa RitaMix of older and mid-century homes. We often find peeling laminate near the sink and repair it before spraying.
- Lake ViewNewer custom kitchens with painted or stained fronts. Refinishing here is usually a color change rather than a repair.
- PaulAnnNewer construction with MDF and melamine fronts. Bonding primer is critical because these surfaces are slick.
- Summer heat above 100 degreesFinish cures too fast if sprayed in direct heat, which causes lap marks. We spray in the morning and control airflow to keep the finish even.
From problem to finished result.
Orange Oak to Soft White
BeforeA 1990s College Hills kitchen with orange oak fronts, greasy lower doors and two doors that stuck every summer. The homeowner had a replacement quote over $14,000 and did not want the tear-out.
AfterWe degreased, sanded and sprayed all 28 doors and drawer fronts in a soft white satin. The sticking doors were planed and refit. Total cost came in under $5,000 and the kitchen was back together in four days.
Wipe with a damp cloth and mild soap. Avoid abrasive pads. Touch up chips at the pull with the leftover paint we leave behind.
Peeling Laminate Near the Sink
BeforeA Santa Rita home with laminate fronts peeling along the sink and dishwasher run. Water had started to swell the core behind the loose edge, and the peel was spreading toward the corner cabinet.
AfterWe trimmed the loose laminate, sealed the exposed core, primed for laminate and sprayed the full run. The peel stopped, the fronts matched the rest of the kitchen, and the repair cost a fraction of new doors.
Dry the sink area after use and check the sealant at the counter edge once a year. Keeping water out of the seam is what protects the repair.
Two-Tone Island and White Uppers
BeforeA Lake View kitchen with dated stained fronts and a large island the family used for everything. The homeowner wanted a navy island and white uppers but did not want to replace the boxes or the countertops.
AfterWe sprayed the island in navy and the uppers in white, matched the sheen and refit all 36 doors and drawers. The countertops stayed, the layout stayed, and the kitchen read as a full remodel.
Clean the island top and fronts with a soft cloth. Recheck hinge screws twice a year, since a heavily used island works its hinges harder than the perimeter.
Cabinet Problems We Solve in San Angelo
Most cabinets we see in San Angelo have the same handful of issues. None of them require a full replacement. Here is what we fix and why it matters.
Cabinet doors sticking due to humidity
We plane the door edge, seal the raw wood, and reset the hinges after spraying. The door closes with a light push instead of a shove. Swollen wood drags on the frame every summer, and forcing the door eventually cracks the hinge plate or splits the stile.
Peeling laminate near the sink
We trim the loose laminate, seal the exposed core, and spray a primer made to bond to laminate. Then we build the finish coats on top. Water gets behind the loose edge, swells the substrate, and the peel spreads along the whole front within a year.
Warped wood and misaligned doors
We check each door for twist, plane or replace what is too far gone, and adjust the hinges so the reveals line up across the run. Gaps show on the face frame, the kitchen looks crooked, and the doors rub the frame every time they close.
Sagging shelves and worn finishes
We reinforce or reposition shelf pins, then refinish the interior faces so the whole cabinet is clean and sealed. Sagging shelves drop dishes, and a worn finish traps grease that no amount of cleaning removes.
A modern kitchen without the replacement price.
Save 50-70%
A full kitchen cabinet replacement in San Angelo runs $8,000-$20,000 once you add boxes, doors, install and countertop repairs. Cabinet refinishing services San Angelo TX usually land between $2,400 and $6,500 depending on door count and finish. You keep the same storage and skip the demolition dust.
Done In 3-5 Days
We pull doors on day one, spray them off site, and have your kitchen back together in three to five working days. No six-week tear-out, no temporary plywood counters, no eating out for a month. You get your kitchen back the same week you start.
Fixes Sticking Doors
San Angelo humidity swells wood and makes doors drag on the frame. We plane and re-fit each door after spraying, then adjust hinges so they close with a light push. That sticking door you have been kicking shut for three summers gets corrected, not painted over.
Modern Color, Same Layout
Going from honey oak to a soft white or a deep navy changes the whole room. We spray waterborne or oil-modified finishes in satin, semi-gloss or matte. Your cabinet painting San Angelo Texas project can match a new backsplash, flooring or countertop without moving a single box.
What you receive
Clear records you can keep and share.
Labeled hardware
Every hinge and pull bagged by door
Touch-up kit
Leftover paint for future chips
What To Know Before You Refinish
Refinishing works on sound boxes, not damaged ones. We check the substrate before we quote, because a soft or swollen cabinet will not hold a finish.
Prep decides
Degreasing and sanding matter more than the paint brand. Skip the prep and the finish peels within a year.
Primer matters
Oak needs a shellac-based primer to block tannin. Laminate and melamine need a bonding primer. Using the wrong one ruins the job.
Refit after spray
Paint adds thickness, so doors must be planed and hinges reset after spraying. A refit door closes clean and stays aligned.
Cabinet work across San Angelo and nearby
Outside these areas? Call and ask about your address. (325) 229-5320
Most San Angelo kitchens run $2,400 to $6,500 in 2026, depending on door count, finish type and how much repair is needed. A small 15-door kitchen with a standard white spray sits near the low end. A 40-door kitchen with a two-tone finish, new hardware and laminate repair lands near the top. We quote after counting doors and checking the boxes.
We do, and we do it as cabinet specialists rather than general painters. Our crew handles the full scope: removal, degreasing, sanding, repair, priming, spraying and reinstallation. We work in Tom Green County and the surrounding neighborhoods, and we can show you finished kitchens in San Angelo before you commit.
The best refinishers are the ones who fix the doors before they finish them and who put the number in writing. Ask any company how they handle sticking doors, peeling laminate and warped wood. If the answer is just sand and paint, keep looking. We correct the fit and the substrate first, then spray.
Yes, if the boxes are structurally sound. Solid hardwood, plywood, MDF and most laminate fronts can be refinished. We check for water damage, delamination and swelling first. If a cabinet is too far gone, we say so and quote a replacement door or box instead of spraying over a problem.
Get Your Cabinet Painting and Refinishing San Angelo TX Quote
One walkthrough, one written number, no pressure. Call (325) 229-5320 and we will count your doors, check the boxes and tell you exactly what your kitchen needs. Most quotes are done in under 45 minutes.
Call for a Cabinet Measure
Call (325) 229-5320 or send a note and we will set a time to measure your kitchen, bath, closet or office. Shop hours are Monday through Friday, 8:00 to 18:00, and most measures get scheduled within a few days. Bring photos and rough dimensions if you have them, and we will talk through door styles, materials and finish options on site.